This means that you have correctly configured your COM Port and device drivers.*IN STOCK* Our own BMW K+DCAN INPA OBD2 USB Cables has arrived! The Chaos K+DCAN Cable! One of the best K+DCAN cables on the market with unapparelled service and attention! At an affordable price, our cables can reliably and quickly flash DMEs and modules in which cheap ebay/amazon cables can not.
You should see that the “USB Serial Port (COM())” is available. To do this, is you need to unplug the USB device and then plug it again into the same USB port where you’ve previously plugged in the USB device of the K+DCAN cable.ħ. Then next you need to check if the Com Port has been configured properly. Make sure to set the “Latency Timer (msec)” to 1.Ħ. You can edit the COM Port number between COM1 to COM30 or you can use the existing COM Port number set up on your device.ĥ. In the Advanced section, the COM Port number is specified, for example, Port=Com1. Navigate to the Properties section, then go to Port Settings, and go to the Advanced section.Ĥ. Expand the Ports section (COM & LPT) and find the USB Serial Port (COM) and right-click.ģ. Go to the Device Manager of your computer.Ģ. If you are looking for a K+DCAN cable, you can buy one on Amazon:Īfter driver installation, the next process is to make sure that the COM port settings in the Device Manager are properly configured. When choosing a K+DCAN cable, make sure that it has these qualifies listed on its product description. It comes with a switch that you can flip left to read older BMW models (1998-2007) that use the K-Line interface and flip right to read the newlywed BMW models (2007-2018) that use the DCAN interface. The K+DCAN cable functions as a USB interface that is equipped with the FTDI 232RL/232RLRQ chip used for coding and complete diagnostics.
Windows laptop computer Buy the Correct K+DCAN Cable To get started, you need to have the following:ģ. In this post, we will show you a guide on how to configure the K+DCAN cable for BMW coding properly. The K+DCAN cable serves as an adapter that will connect to the vehicle’s OBD2 port and to a computer with the coding software.
The K+DCAN cable is one of the most common cable adapters used for BMW coding on E-chassis models.
0 kommentar(er)
